The updated efficient boiling dryer price corresponds to the use value. Flash dryer is mainly composed of air intake system, heating system, feeding system, drying main engine, dust collection system, exhaust system, control system and so on. During the operation, the wet material is entered into the dry chamber by the spiral feeder. The material meets the high speed changing hot air in the dry room. The fine powder material is moved to the upper end of the dry chamber by hot air, the material that can not be taken away from the bottom of the dry room, the broken blasting installation of the bottom, the quick evacuation of the material and the touch of the hot air. The touch of the area is agility. Under the infection of the centrifugal force (the top is installed at the top), the products that reach the dry water temperature and the certain fineness are blown out to be installed, and the material is dryness in this process.
      The high efficiency boiling dryer combines the refrigeration system, the vacuum system, the heat conduction oil heating system and the drainage system. A new type of box structure, which is used to store the material space in the box to dry the freeze-drying vacuum drying, can make the powder have good dispersion. After putting on the machine, put the material into the material box for refrigeration. On the one hand, the process of material freezing is that the vacuum system takes a part of water away from the vacuum; on the other hand, when the material is frozen, the moisture content in some molecules is frozen on the surface of the material. After the freezing requirement is reached, the material is heated and dried by the heating system, and the moisture content contained in the material is brought to the freezing. The trap box is frozen to meet the requirements of freeze-drying.