Feedback table of customer selection for drying equipment
|
Please fill in the form in detail so that our company provides a prudent selection and recommendation
|
|
|
1. Material name:
Molecular formula:
PH value:
|
|
|
|
3. Other properties of materials:
Flammability
Explosive
Agglomerate
Smell Other:
|
|
4.
The name of the evaporated medium:
Molecular formula:
PH value:
|
Boiling point of an evaporated medium:
℃ ;Do you need to recover: Yes
、No
|
|
5. Initial moisture content of material:
% ;It contains crystalline water:
|
Moisture content after drying:
% ;Demand for residual crystalline water:
|
|
6. Initial temperature of material:
℃ ;Demand for the temperature after drying:
℃。
Whether or not the cooling is used: Yes
、No
|
|
7.
The maximum temperature to bear when the material is dried:
℃;
Optimum temperature range of material drying:
℃
|
|
8.Softening temperature of material:
℃;The melting point of material:
℃
|
|
9.
Specific heat of material:
KJ/kg. ℃;
Thermal conductivity of materials:
KJ/m2.h. ℃
|
|
10.True density of material:
kg/m3,
Bulk density of materials:
kg/m3
|
|
11.
Particle size distribution range:
mm(order)to
mm(order);Proportion content≥
%
|
Among:Maximum granularity
mm(order);Proportion content≥
%
|
Minimum granularity:
mm(order);Proportion content≥
%
|
|
12.Requirements for grain size for dry finished products:
mm(order)
|
|
13.
Viscosity in the original state of material:
CPS(cp);
Does temperature increase the viscosity:Yes
、No
|
|
14.Can the form of material be destroyed when drying:Sure
May not
|
|
15.Yield after drying:
kg/h (Or wet material treatment:
kg/h)
|
|
16.Demand for drying methods:
Continuous drying 、
Gap drying 、
Dynamic drying 、
Static drying 、
|
Hot air drying 、
Vacuum drying 、
Microwave drying 、Other:
|
|
17.Drying methods of materials or drying methods for similar products:
|
The type of dryer you want to use:
|
|
18.Air intake requirement:
Natural folk songs ,
30Ten thousand stage filter,
10Ten thousand stage filter,
1Ten thousand stage filter, Other:
|
|
19.User requirements for the material of drying equipment:
Material contact is stainless steel 、
All stainless steel 、
Titanium 、
|
Aluminium alloy 、
Carbon steel 、
Glass lined 、
PTFE 、 Other:
|
|
20.To be made of stainless steel:
SUS304 ,
SUS321 ,
SUS316 ,
SUS316L,
SUS2235 ,
|
Other:
|
|
21.Requirements for material recovery:≥
%;Requirements for dust emission:≤
mg/nm3 ;
|
Emission requirements for environmental emission:≤
mg/nm3;Maximum allowable discharge requirements for waste water and waste liquid≤
mg/L
|
|
22.Hot medium and heat source used in the drying process: Hot water
℃ ; Steam
Mpa; Heat conduction oil
℃;
|
Electric heating
、Coal fired hot blast stove
、Fuel hot air stove
、Gas-fired hot blast stove
、Other:
|
|
23.Thermal medium and heat source: Self
、Buy
、Supporting procurement
、Other:
|
|
24.Cleaning and hygienic requirements for equipment:
|
|
25.Equipment use:
、Altitude:
、Humidity:
、Maximum temperature:
、
|
Minimum temperature:
、Annual average temperature:
、Other:
|
|
26.Budgetary investment for selected equipment(RMB):
Million yuan
|
|
27.Other requirements:
|
Verification Code:
|
|
|
|